UAB PINUS LT|KSTAR BlueSpark 10-20kWh single-phase energy storage with inverter 3-6kW
UAB PINUS LT|KSTAR BlueSpark 10-20kWh single-phase energy storage with inverter 3-6kW
UAB PINUS LT|KSTAR BlueSpark 10-20kWh single-phase energy storage with inverter 3-6kW
UAB PINUS LT|KSTAR BlueSpark 10-20kWh single-phase energy storage with inverter 3-6kW
UAB PINUS LT|KSTAR BlueSpark 10-20kWh single-phase energy storage with inverter 3-6kW
Previous keyboard_arrow_left
Next keyboard_arrow_right
UAB PINUS LT|KSTAR BlueSpark 10-20kWh single-phase energy storage with inverter 3-6kW
UAB PINUS LT|KSTAR BlueSpark 10-20kWh single-phase energy storage with inverter 3-6kW
UAB PINUS LT|KSTAR BlueSpark 10-20kWh single-phase energy storage with inverter 3-6kW
UAB PINUS LT|KSTAR BlueSpark 10-20kWh single-phase energy storage with inverter 3-6kW
UAB PINUS LT|KSTAR BlueSpark 10-20kWh single-phase energy storage with inverter 3-6kW

KSTAR BlueSpark 10-20kWh single-phase energy storage with inverter 3-6kW

Datasheet

Kstar single-phase energy storage is a smart and reliable energy management system for modern homes with an integrated hybrid inverter/converter 3-6kW. Suitable for both on-grid and off-grid configurations. Depending on the power of the solar power plant, the optimal storage and converter set is selected. Suitable for using self-generated energy, reducing loads and consuming according to time tariffs. Up to 4 battery blocks can be connected. Long-lasting CATL and EVE cells, up to 6000 charging cycles, IP66 protection against environmental influences. Remote control, compatibility with 5G and heat pumps. Convenient installation - without wires.

Warranty
5 Years, 10 Years
Certificate
IEC/EN 62619; UN38.3; UL1973
Installation
on the wall or on the floor
Battery Type
Lifepo4 Battery
Capacity per module
5,12 kWh
IP rating
IP66
Number of cycles
6000
Recommended to connect
Indoor
Cell type
CATL / EVE

Kstar single-phase energy storage BlueSpark Series is a reliable and compact battery for homes, designed for the efficient use of solar energy. The capacity of one module reaches 5.12 kWh (used – 4.6 kWh), and by connecting several modules, the system can be expanded to 20.48 kWh. This allows you to choose a single-phase storage that best meets the needs of your home.

The storage is made using safe LiFePO₄ technology, has an efficiency of more than 94% and a long service life. It is protected according to IP65 class, therefore it is suitable for installation both indoors and outdoors. The device is adapted to work in various weather conditions – it operates smoothly from winter frosts to summer heat, in the temperature range from -10 °C to +50 °C.

Due to the modular design, the system can be expanded gradually, and compact dimensions (725 × 418 × 165 mm) and 51 kg weight ensure convenient transportation and installation. The manufacturer provides a 5-year product and 10-year performance warranty, making it a reliable solution for the long term.

Kstar single-phase energy storage meets the requirements of APVA support, so the system can be installed with state compensation. Certified by international standards IEC / EN 62619, UN38.3 and UL1973, which ensure safe use and transportation.

You can find more useful solutions in our category Energy storage for residents.

chat Comments (0)
Loading...